The Supercapacitor Degradation State Diagnostic System Based on LabVIEW
DOI:
https://doi.org/10.3991/ijoe.v9i3.2630Keywords:
supercapacitor degradation state, capacitance, ESR, leakage currentAbstract
In this thesis, we design and implement the degradation state diagnostic system for supercapacitor. In order to detect the degradation degree of supercapacitor, it is necessary to test the changes of the parameters that include capacitance, ESR (equivalent series resistance) and the leakage current between the terminals of supercapacitor. The way to obtain these parameters is to measure the voltage and current value by the data acquisition card, and then transmit to the software of LabVIEW calculating the values. By comparing the values of capacitance and ESR with the original value separately, the degradation state of the supercapacitor can be estimated.
Downloads
Published
How to Cite
Issue
Section
License
The submitting author warrants that the submission is original and that she/he is the author of the submission together with the named co-authors; to the extend the submission incorporates text passages, figures, data or other material from the work of others, the submitting author has obtained any necessary permission.
Articles in this journal are published under the Creative Commons Attribution Licence (CC-BY What does this mean?). This is to get more legal certainty about what readers can do with published articles, and thus a wider dissemination and archiving, which in turn makes publishing with this journal more valuable for you, the authors.
By submitting an article the author grants to this journal the non-exclusive right to publish it. The author retains the copyright and the publishing rights for his article without any restrictions.