Research on five axis NC Machining Simulation Based on VERICUT

Authors

  • Zhihua Yuan Shenyang Ligong University,Shenyang,China
  • Jipeng Wang Shenyang Ligong University,Shenyang,China
  • Xiaolong Kong Shenyang Ligong University,Shenyang,China
  • Yuhui Hu Shenyang Polytechnic College

DOI:

https://doi.org/10.3991/ijoe.v11i7.4767

Keywords:

VERICUT 7.0 five axis machine tool, NC, Simulation

Abstract


The structure of five axis machine tool is complex and expensive, especially in the processing of complex and sophisticated parts. It is prone to produce the phenomenon of overcutting or undercutting between the machine parts and the knives or the machine tool , which will cause serious damage or even grievous scrap on the machine tool . With the help of VERICUT 7.0 Simulation of NC machine tool, you can modify and optimize the NC program code, shortening the real processing time required and improving the economic benefit of the company remarkably.

Downloads

Published

2015-08-31

How to Cite

Yuan, Z., Wang, J., Kong, X., & Hu, Y. (2015). Research on five axis NC Machining Simulation Based on VERICUT. International Journal of Online and Biomedical Engineering (iJOE), 11(7), pp. 51–53. https://doi.org/10.3991/ijoe.v11i7.4767