Virtual Reality and Haptics for Product Assembly

Authors

  • Pingjun Xia IDMEC-Polo FEUP, Faculty of Engineering, University of Porto
  • Antonio M Lopes IDMEC-Polo FEUP, Faculty of Engineering, University of Porto
  • Maria Teresa Restivo IDMEC-Polo FEUP, Faculty of Engineering, University of Porto

DOI:

https://doi.org/10.3991/ijoe.v8iS1.1894

Keywords:

Haptics Interface, Virtual Reality, Assembly

Abstract


Haptics can significantly enhance the user's sense of immersion and interactivity. An industrial application of virtual reality and haptics for product assembly is described in this paper, which provides a new and low-cost approach for product assembly design, assembly task planning and assembly operation training. A demonstration of the system with haptics device interaction was available at the session of exp.at'11.

Downloads

Published

2012-01-22

How to Cite

Xia, P., Lopes, A. M., & Restivo, M. T. (2012). Virtual Reality and Haptics for Product Assembly. International Journal of Online and Biomedical Engineering (iJOE), 8(S1), pp. 12–14. https://doi.org/10.3991/ijoe.v8iS1.1894

Issue

Vol. 8 (2012): Special Issue: exp.at'11

Section

Special Focus Papers