ECG Generator for Educational Biomedical Engineering Laboratory
DOI:
https://doi.org/10.3991/ijoe.v18i02.25363Keywords:
ECG signal, Pulse Width Modulation, Analog filtering, Data acquisition.Abstract
The aim of this work is to design and implement an ECG generator for didactic biomedical engineering laboratory. The proposed generator provides analog ECG signals using synthesized or experimental records. The technique used in this work consists to generate the desired ECG waveforms through the PWM outputs of an Arduino board and low-pass filter. To provide many educational functions in both analog instrumentation and digital processing, the generator supplies output voltages in asymmetric or differential mode. To allow the user to setup the ECG signal to be generated, a LabVIEW application has been implemented. Experimentations on proposed generator and results were accomplished using the NI USB 6009 acquisition module and NI MAX software.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 MOUNAIM AQIL, Atman JBARI
This work is licensed under a Creative Commons Attribution 4.0 International License.
The submitting author warrants that the submission is original and that she/he is the author of the submission together with the named co-authors; to the extend the submission incorporates text passages, figures, data or other material from the work of others, the submitting author has obtained any necessary permission.
Articles in this journal are published under the Creative Commons Attribution Licence (CC-BY What does this mean?). This is to get more legal certainty about what readers can do with published articles, and thus a wider dissemination and archiving, which in turn makes publishing with this journal more valuable for you, the authors.
By submitting an article the author grants to this journal the non-exclusive right to publish it. The author retains the copyright and the publishing rights for his article without any restrictions.
