Design State Exploration applied to the development of a Remote Lab for Projectile Launch Experiments

Authors

  • Gustavo R. Alves Polytechnic of Porto - School of Engineering
  • Maria A. Marques Polytechnic of Porto - School of Engineering
  • Carlos Paiva Polytechnic of Porto - School of Engineering
  • Pedro Nogueira Polytechnic of Porto - School of Engineering
  • Pedro Guimarães Polytechnic of Porto - School of Engineering
  • Rubem Couto Polytechnic of Porto - School of Engineering
  • Laryssa Cherem Federal Institute of Santa Catarina
  • Vitor Borba Federal Institute of Santa Catarina
  • Golberi S. Ferreira Federal Institute of Santa Catarina
  • Stefan Koch Carinthia University of Applied Sciences
  • Andreas Pester Carinthia University of Applied Sciences

DOI:

https://doi.org/10.3991/ijoe.v9i3.2637

Abstract


This paper describes the application of Design State Exploration techniques in the development of a remote lab for projectile motion experiments. The application was enabled by the existence of two independent teams: one composed of a series of internships that started first and another with two grantees that started a few months later. The paper presents evidence on how this approach provided gains in the development process conducted by the second team that benefited from design state exploration studies performed by the first team. This particular aspect is highlighted in relation to the work already presented in the 10th Remote Engineering and Virtual Instrumentation (REV) conference.

Downloads

Published

2013-06-11

How to Cite

Alves, G. R., Marques, M. A., Paiva, C., Nogueira, P., Guimarães, P., Couto, R., … Pester, A. (2013). Design State Exploration applied to the development of a Remote Lab for Projectile Launch Experiments. International Journal of Online and Biomedical Engineering (iJOE), 9(3), pp. 55–60. https://doi.org/10.3991/ijoe.v9i3.2637

Issue

Vol. 9 No. 3 (2013)

Section

Papers

License

The submitting author warrants that the submission is original and that she/he is the author of the submission together with the named co-authors; to the extend the submission incorporates text passages, figures, data or other material from the work of others, the submitting author has obtained any necessary permission.
Articles in this journal are published under the Creative Commons Attribution Licence (CC-BY What does this mean?). This is to get more legal certainty about what readers can do with published articles, and thus a wider dissemination and archiving, which in turn makes publishing with this journal more valuable for you, the authors.
By submitting an article the author grants to this journal the non-exclusive right to publish it. The author retains the copyright and the publishing rights for his article without any restrictions.