Remote laboratory hardware modules based on networked embedded systems

Authors

  • Darko Fuduric FER
  • Mario Žagar University of Zagreb
  • Tomislav Se Se University of Zagreb
  • Marin Orli? University of Zagreb

DOI:

https://doi.org/10.3991/ijoe.v3i3.429

Keywords:

e-Learning, Embedded systems, Remote laboratory

Abstract


Networked embedded microcontrollers integrated into remote laboratory are proposed. Hardware and software architecture responsible for functioning of the laboratory is discussed. Compatibility with existing networks is mandatory, so common TCP/IP stack layer is introduced. Open remote laboratory, based on embedded systems is accessible from anywhere on the Internet.. It is suitable for practical education in microcontroller fundamentals.

Author Biographies

Darko Fuduric, FER

BSc, Faculty of Electrical Engineering and Computing, Department of Control and Computer Engineering

Mario Žagar, University of Zagreb

PhD, Faculty of Electrical Engineering and Computing, Department of Control and Computer Engineering

Tomislav Se Se, University of Zagreb

BSc, Faculty of Electrical Engineering and Computing, Department of Control and Computer Engineering

Marin Orli?, University of Zagreb

MSc, Faculty of Electrical Engineering and Computing, Department of Control and Computer Engineering

Downloads

Published

2007-08-07

How to Cite

Fuduric, D., Žagar, M., Se, T. S., & Orli?, M. (2007). Remote laboratory hardware modules based on networked embedded systems. International Journal of Online and Biomedical Engineering (iJOE), 3(3). https://doi.org/10.3991/ijoe.v3i3.429

Issue

Section

Special Focus Papers