Design of a State Monitoring System for Equipment based on the Zigbee Wireless Sensor Network

Authors

  • Li Hua
  • Xu Da
  • Fuquan Zhao

DOI:

https://doi.org/10.3991/ijoe.v12i06.5516

Keywords:

CC2530, measurement, wireless sensor network, Zigbee

Abstract


For the sake of overcoming the shortcoming of some equipment such as complex wiring and much measurement parameter, a wireless state monitoring system is developed based on Zigbee, which was composed of upper monitor control PC, wireless gateway CC2530, sensor node CC2530 and sensor module. By studying the characteristic of the equipment, wireless sensor network of a center controller and six wireless sensor node was made up. Then the nod hardware circuit were designed, the wireless module software was programmed by C language, and furthermore, the user interface software was developed based on LabVIEW. The test is done to show that the system can meet state monitoring requirements for some equipment.

Downloads

Published

2016-06-30

How to Cite

Hua, L., Da, X., & Zhao, F. (2016). Design of a State Monitoring System for Equipment based on the Zigbee Wireless Sensor Network. International Journal of Online and Biomedical Engineering (iJOE), 12(06), pp. 20–23. https://doi.org/10.3991/ijoe.v12i06.5516

Issue

Section

Papers