A Wearable Strain Sensor Based on 3D Silicone Printing with Composite Structure Design
DOI:
https://doi.org/10.3991/ijoe.v22i03.59657Keywords:
Flexible strain sensor, Hysteresis effect, 3D silicone printing, Wearable monitoring, Multilayer structureAbstract
Flexible strain sensors hold significant potential in wearable electronics and human motion tracking; however, achieving a balance among sufficient measurement range, low hysteresis response, and reliable skin adhesion remains challenging. In this study, a wearable strain sensor was developed using 3D-printed silicone, and the performance of a single-layer conductive silicone design (P1) was compared with a multilayer configuration integrating an adhesive interface and medical-grade artificial skin (P2). Results show that P2 successfully extends the measurable displacement range to 10 mm and reduces hysteresis from 0.26 to 0.03 at 3 mm strain, while maintaining stable cyclic performance (standard deviation ± 0.018). The multilayer architecture improves repeatability under repeated stretching by stabilizing the conductive network and enhancing skin-attachment reliability. Human testing further demonstrates that P2 can reliably track wrist motion within 0°–30°, with resistance changes closely aligned to IMU-derived angle signals and without noticeable baseline drift. Overall, this work presents a cost-effective, skin-compatible silicone strain sensor suitable for wearable human motion monitoring, highlighting its potential for applications in health tracking and rehabilitation-related movement analysis.
References
[1] M. Amjadi, K. U. Kyung, I. Park, and M. Sitti, “Stretchable, Skin-Mountable, and Wearable Strain Sensors and Their Potential Applications: A Review,” Advanced Functional Materials, vol. 26, no. 11, pp. 1678-1698, 2016. http://dx.doi.org/10.1002/adfm.201504755
[2] T. Q. Trung, and N. E. Lee, “Flexible and Stretchable Physical Sensor Integrated Platforms for Wearable Human-Activity Monitoring and Personal Healthcare,” Advanced Materials, vol. 28, no. 22, pp. 4338-4372, 2016. http://dx.doi.org/10.1002/adma.201504244
[3] X. W. Wang, Z. Liu, and T. Zhang, “Flexible Sensing Electronics for Wearable/Attachable Health Monitoring,” Small, vol. 13, no. 25, 2017. http://dx.doi.org/10.1002/smll.201602790
[4] J. C. Yang, J. Mun, S. Y. Kwon, S. Park, Z. Bao, and S. Park, “Electronic Skin: Recent Progress and Future Prospects for Skin-Attachable Devices for Health Monitoring, Robotics, and Prosthetics,” Advanced Materials, vol. 31, no. 48, pp. 1904765, 2019. https://doi.org/10.1002/adma.201904765
[5] N. I. Sonil, Z. Ullah, J. Chen, and G. P. Wang, “Wearable strain sensors for human motion detection and health monitoring based on hybrid graphite-textile flexible electrodes,” Journal of Materials Research and Technology, vol. 26, pp. 764-774, 2023. https://doi.org/10.1016/j.jmrt.2023.07.185
[6] H. Souri, H. Banerjee, A. Jusufi, N. Radacsi, A. A. Stokes, I. Park, M. Sitti, and M. Amjadi, “Wearable and Stretchable Strain Sensors: Materials, Sensing Mechanisms, and Applications,” Advanced Intelligent Systems, vol. 2, no. 8, pp. 2000039, 2020. https://doi.org/10.1002/aisy.202000039
[7] Y. Liu, H. Wang, W. Zhao, M. Zhang, H. Qin, and Y. Xie, "Flexible, Stretchable Sensors for Wearable Health Monitoring: Sensing Mechanisms, Materials, Fabrication Strategies and Features," Sensors, vol. 18, no. 2, 2018. http://dx.doi.org/10.3390/s18020645
[8] X. Huang, L. Liu, Y. H. Lin, R. Feng, Y. Shen, Y. Chang, and H. Zhao, “High-stretchability and low-hysteresis strain sensors using origami-inspired 3D mesostructures,” Science Advances, vol. 9, no. 34, pp. eadh9799, 2023. http://dx.doi.org/10.1126/sciadv.adh9799
[9] F. Xue, Q. Peng, R. Ding, P. Li, X. Zhao, H. Zheng, L. Xu, Z. Tang, X. Zhang, and X. He, “Ultra-sensitive, highly linear, and hysteresis-free strain sensors enabled by gradient stiffness sliding strategy,” npj Flexible Electronics, vol. 8, no. 1, pp. 14, 2024. http://dx.doi.org/10.1038/s41528-024-00301-7
[10] C. Yan, J. Wang, W. Kang, M. Cui, X. Wang, C. Y. Foo, K. J. Chee, and P. S. Lee, “Highly Stretchable Piezoresistive Graphene–Nanocellulose Nanopaper for Strain Sensors,” Advanced Materials, vol. 26, no. 13, pp. 2022-2027, 2014. https://doi.org/10.1002/adma.201304742
[11] M. Amjadi, A. Pichitpajongkit, S. Lee, S. Ryu, and I. Park, “Highly Stretchable and Sensitive Strain Sensor Based on Silver Nanowire–Elastomer Nanocomposite,” ACS Nano, vol. 8, no. 5, pp. 5154-5163, 2014. http://dx.doi.org/10.1021/nn501204t
[12] R. Guo, Y. Yu, J. Zeng, X. Liu, X. Zhou, L. Niu, T. Gao, K. Li, Y. Yang, F. Zhou, and Z. Zheng, “Biomimicking Topographic Elastomeric Petals (E-Petals) for Omnidirectional Stretchable and Printable Electronics,” Advanced Science, vol. 2, no. 3, pp. 1400021, 2015. https://doi.org/10.1002/advs.201400021
[13] E. Roh, B.-U. Hwang, D. Kim, B.-Y. Kim, and N.-E. Lee, “Stretchable, Transparent, Ultrasensitive, and Patchable Strain Sensor for Human–Machine Interfaces Comprising a Nanohybrid of Carbon Nanotubes and Conductive Elastomers,” ACS Nano, vol. 9, no. 6, pp. 6252-6261, 2015. http://dx.doi.org/10.1021/acsnano.5b01613
[14] S. Zhao, J. Li, D. Cao, G. Zhang, J. Li, K. Li, Y. Yang, W. Wang, Y. Jin, R. Sun, and C.-P. Wong, “Recent Advancements in Flexible and Stretchable Electrodes for Electromechanical Sensors: Strategies, Materials, and Features,” ACS Applied Materials & Interfaces, vol. 9, no. 14, pp. 12147-12164, 2017. http://dx.doi.org/10.1021/acsami.6b13800
[15] G. Shi, Z. Zhao, J.-H. Pai, I. Lee, L. Zhang, C. Stevenson, K. Ishara, R. Zhang, H. Zhu, and J. Ma, “Highly Sensitive, Wearable, Durable Strain Sensors and Stretchable Conductors Using Graphene/Silicon Rubber Composites,” Advanced Functional Materials, vol. 26, no. 42, pp. 7614-7625, 2016. https://doi.org/10.1002/adfm.201602619
[16] B. Liang, Z. Lin, W. Chen, Z. He, J. Zhong, H. Zhu, Z. Tang, and X. Gui, “Ultra-stretchable and highly sensitive strain sensor based on gradient structure carbon nanotubes,” Nanoscale, vol. 10, no. 28, pp. 13599-13606, 2018. http://dx.doi.org/10.1039/C8NR02528B
[17] Y. Zheng, Y. Li, Z. Li, Y. Wang, K. Dai, G. Zheng, C. Liu, and C. Shen, “The effect of filler dimensionality on the electromechanical performance of polydimethylsiloxane based conductive nanocomposites for flexible strain sensors,” Composites Science and Technology, vol. 139, pp. 64-73, 2017. https://doi.org/10.1016/j.compscitech.2016.12.014
[18] J. F. Christ, N. Aliheidari, A. Ameli, and P. Pötschke, “3D printed highly elastic strain sensors of multiwalled carbon nanotube/thermoplastic polyurethane nanocomposites,” Materials & Design, vol. 131, pp. 394-401, 2017. https://doi.org/10.1016/j.matdes.2017.06.011
[19] Y. Wang, J. Hao, Z. Huang, G. Zheng, K. Dai, C. Liu, and C. Shen, “Flexible electrically resistive-type strain sensors based on reduced graphene oxide-decorated electrospun polymer fibrous mats for human motion monitoring,” Carbon, vol. 126, pp. 360-371, 2018. https://doi.org/10.1016/j.carbon.2017.10.034
[20] D. Niu, W. Jiang, G. Ye, K. Wang, L. Yin, Y. Shi, B. Chen, F. Luo, and H. Liu, “Graphene-elastomer nanocomposites based flexible piezoresistive sensors for strain and pressure detection,” Materials Research Bulletin, vol. 102, pp. 92-99, 2018. https://doi.org/10.1016/j.materresbull.2018.02.005
[21] Z. Zhang, M. T. Innocent, N. Tang, R. Li, Z. Hu, M. Zhai, L. Yang, W. Ma, H. Xiang, and M. Zhu, “Electromechanical Performance of Strain Sensors Based on Viscoelastic Conductive Composite Polymer Fibers,” ACS Applied Materials & Interfaces, vol. 14, no. 39, pp. 44832-44840, 2022. http://dx.doi.org/10.1021/acsami.2c12120
[22] X. Wu, Y. Han, X. Zhang, Z. Zhou, and C. Lu, “Large-Area Compliant, Low-Cost, and Versatile Pressure-Sensing Platform Based on Microcrack-Designed Carbon Black@Polyurethane Sponge for Human–Machine Interfacing,” Advanced Functional Materials, vol. 26, no. 34, pp. 6246-6256, 2016. https://doi.org/10.1002/adfm.201601995
[23] Z. Wang, Y. Huang, J. Sun, Y. Huang, H. Hu, R. Jiang, W. Gai, G. Li, and C. Zhi, “Polyurethane/Cotton/Carbon Nanotubes Core-Spun Yarn as High Reliability Stretchable Strain Sensor for Human Motion Detection,” ACS Applied Materials & Interfaces, vol. 8, no. 37, pp. 24837-24843, 2016. http://dx.doi.org/10.1021/acsami.6b08207
[24] H. Jeon, S. K. Hong, M. S. Kim, S. J. Cho, and G. Lim, “Omni-Purpose Stretchable Strain Sensor Based on a Highly Dense Nanocracking Structure for Whole-Body Motion Monitoring,” ACS Applied Materials & Interfaces, vol. 9, no. 48, pp. 41712-41721, 2017. http://dx.doi.org/10.1021/acsami.7b14153
[25] L. Duan, D. R. D'Hooge, and L. Cardon, “Recent progress on flexible and stretchable piezoresistive strain sensors: From design to application,” Progress in Materials Science, vol. 114, pp. 100617, 2020. https://doi.org/10.1016/j.pmatsci.2019.100617
[26] H. Park, Y. R. Jeong, J. Yun, S. Y. Hong, S. Jin, S.-J. Lee, G. Zi, and J. S. Ha, “Stretchable Array of Highly Sensitive Pressure Sensors Consisting of Polyaniline Nanofibers and Au-Coated Polydimethylsiloxane Micropillars,” ACS Nano, vol. 9, no. 10, pp. 9974-9985, 2015. http://dx.doi.org/10.1021/acsnano.5b03510
[27] Y. Cheng, R. Wang, J. Sun, and L. Gao, “A Stretchable and Highly Sensitive Graphene-Based Fiber for Sensing Tensile Strain, Bending, and Torsion,” Advanced Materials, vol. 27, no. 45, pp. 7365-7371, 2015. https://doi.org/10.1002/adma.201503558
[28] K.-H. Kim, D.-W. Jeong, N.-S. Jang, S.-H. Ha, and J.-M. Kim, “Extremely stretchable conductors based on hierarchically-structured metal nanowire network,” RSC Advances, vol. 6, no. 62, pp. 56896-56902, 2016. http://dx.doi.org/10.1039/C6RA09644A
[29] S. Zhao, L. Guo, J. Li, N. Li, G. Zhang, Y. Gao, J. Li, D. Cao, W. Wang, Y. Jin, R. Sun, and C.-P. Wong, “Binary Synergistic Sensitivity Strengthening of Bioinspired Hierarchical Architectures based on Fragmentized Reduced Graphene Oxide Sponge and Silver Nanoparticles for Strain Sensors and Beyond,” Small, vol. 13, no. 28, pp. 1700944, 2017. https://doi.org/10.1002/smll.201700944
[30] X. Wu, Y. Han, X. Zhang, and C. Lu, “Spirally Structured Conductive Composites for Highly Stretchable, Robust Conductors and Sensors,” ACS Applied Materials & Interfaces, vol. 9, no. 27, pp. 23007-23016, 2017. http://dx.doi.org/10.1021/acsami.7b06256
[31] J. Zhu, J. J. Fox, N. Yi, and H. Cheng, “Structural Design for Stretchable Microstrip Antennas,” ACS Applied Materials & Interfaces, vol. 11, no. 9, pp. 8867-8877, 2019. http://dx.doi.org/10.1021/acsami.8b22021
[32] P. Zhu, H. Du, X. Hou, P. Lu, L. Wang, J. Huang, N. Bai, Z. Wu, N. X. Fang, and C. F. Guo, “Skin-electrode iontronic interface for mechanosensing,” Nature Communications, vol. 12, no. 1, pp. 4731, 2021. http://dx.doi.org/10.1038/s41467-021-24946-4
[33] D. Zhong, C. Wu, Y. Jiang, Y. Yuan, M.-g. Kim, Y. Nishio, C.-C. Shih, W. Wang, J.-C. Lai, X. Ji, T. Z. Gao, Y.-X. Wang, C. Xu, Y. Zheng, Z. Yu, H. Gong, N. Matsuhisa, C. Zhao, Y. Lei, D. Liu, S. Zhang, Y. Ochiai, S. Liu, S. Wei, J. B. H. Tok, and Z. Bao, “High-speed and large-scale intrinsically stretchable integrated circuits,” Nature, vol. 627, no. 8003, pp. 313-320, 2024. http://dx.doi.org/10.1038/s41586-024-07096-7
[34] Y. Gao, L. Yu, J. C. Yeo, and C. T. Lim, “Flexible Hybrid Sensors for Health Monitoring: Materials and Mechanisms to Render Wearability,” Advanced Materials, vol. 32, no. 15, pp. 1902133, 2020. https://doi.org/10.1002/adma.201902133
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Jiun-Hung Lin
This work is licensed under a Creative Commons Attribution 4.0 International License.
