Interactive Head Control of Embroidery Machine using Embedded Web Server

Authors

  • Hiren K Mewada Charotar University of Science and Technology, At Post Changa, Ta Petlad, Dist Anand, Gujarat India

DOI:

https://doi.org/10.3991/ijoe.v13i04.6848

Keywords:

— Wilcom software, Embroidery machine, ARM Processor, embedded web server

Abstract


This paper proposes the design and implementation of prototype model to control embroidery machine using single board ARM processor. Wilcom is the software largely used for embroidery design. Designs prepared using Wilcom software are printed and supplied to the machine for further process. The proposed prototype model extracts the design data from this software by avoiding the printing and/or scanning of the user design and the design data are supplied to ARM based prototype embroidery machine for printing. In proposed model, the pencil is used as printing head and A4 size paper is used for the printing. Further to control the head, Use of web server design is also proposed using ARM processor.

Downloads

Published

2017-04-28

How to Cite

Mewada, H. K. (2017). Interactive Head Control of Embroidery Machine using Embedded Web Server. International Journal of Online and Biomedical Engineering (iJOE), 13(04), pp. 83–93. https://doi.org/10.3991/ijoe.v13i04.6848

Issue

Section

Application Notes