Design and Verification of Application Specific Integrated Circuits in a Network of Online Labs

Authors

  • Danilo Garbi Zutin Carinthia University of Applied Sciences, Villach
  • Michael E. Auer CTI Villach
  • A.Y. Al-Zoubi Princess Sumaya University for Technology, Amman

DOI:

https://doi.org/10.3991/ijoe.v5i3.690

Keywords:

Online Laboratories, e-Learning, Virtual Instrumentation

Abstract


A solution to implement a remote laboratory for testing and designing analog Application-Specific Integrated Circuits of the type (ispPAC10) is presented. The application allows electrical engineering students to access and perform measurements and conduct analog electronics experiments over the internet. PAC-Designer software, running on a Citrix server, is used in the circuit design in which the signals are generated and the responses are acquired by a data acquisition board controlled by LabVIEW. Three interconnected remote labs located in three different continents will be implementing the proposed system.

Author Biography

Michael E. Auer, CTI Villach

Carinthia Tech Institute and International Assocation of Online Engineering, Austria Professor, President and CEO >> Editor-in-Chief

Downloads

Published

2009-07-15

How to Cite

Garbi Zutin, D., Auer, M. E., & Al-Zoubi, A. (2009). Design and Verification of Application Specific Integrated Circuits in a Network of Online Labs. International Journal of Online and Biomedical Engineering (iJOE), 5(3), pp. 25–29. https://doi.org/10.3991/ijoe.v5i3.690

Issue

Vol. 5 No. 3 (2009)

Section

Papers