FPGA Alarm System Based on Multi Temperature Sensor

Authors

  • Yubao Xu West Anhui University

DOI:

https://doi.org/10.3991/ijoe.v13i05.7053

Keywords:

temperature sensor, alarm system, FPGA, temperature monitoring

Abstract


The purpose of this study is to achieve real-time acquisition and monitoring of temperature in large-scale industrial or agricultural production scene, and timely detect abnormal temperature. FPGA chip, multi temperature sensor and alarm control module three parts consist of FPGA alarm system obtained based on multi temperature sensor. Multi temperature sensor is used for the acquisition of relevant temperature signal in the production site, and the transmission of the collected data through the way of digital signal chip to the FPGA chip for further processing. The FPGA chip is responsible for the parameter setting, the temperature signal acquisition and the threshold comparison and so on, and according to the data processing result, it can send out the normal response control signal to the alarm module. The alarm module contains the pre-warning lights and the alarm device that it can receive the control signal and realize alarm response. The results showed that the test in planting flowers in greenhouse showed that the system is sensitive in response and small in error of temperature acquisition, in accordance with the requirements for use. As a result, the system can be widely used in the temperature monitoring in the production scene, suitable for being promoted in a variety of occasions needing for monitoring the temperature.

Author Biography

Yubao Xu, West Anhui University

associate professor

Downloads

Published

2017-05-14

How to Cite

Xu, Y. (2017). FPGA Alarm System Based on Multi Temperature Sensor. International Journal of Online and Biomedical Engineering (iJOE), 13(05), pp. 109–121. https://doi.org/10.3991/ijoe.v13i05.7053

Issue

Section

Papers